Strap coilers

Strap and cord coilers, straps, cover panels

Beratung anfragen Infos für Privatkunden

Product information

That does not exist – that is a sentence that does not exist with us

SELVE has the largest range of strap coilers on the market.

Our portfolio has grown over the decades to offer precisely the right solution for virtually every application. Even though many roller shutters today are motor powered and automated, strap coilers are still required for opening and closing them by hand. Over four million strap coilers leave the highly automated production line at our plant in Bad Arolsen every year. These production methods ensure precisely reproducible quality at an extremely high level. We also produce all stamped and plastic parts for our range of strap coilers ourselves.

SELVE is the world market leader in strap coilers, and has been recognised as such in the "World market leaders from Southwestfalia" campaign conducted by the Southwestfalia Chamber of Commerce and Industry (SIHK).

Our huge range of strap and cord coilers impressively demonstrates the versatility of our roller shutters:

Flush-in strap coilers are fitted in wall boxes. Most of the coiler is concealed in the wall, with only the cover panel and strap outlet visible from the outside.
Surface-mounted strap coilers are screwed onto the wall or window frame. These narrow models can be swivelled into various positions, and can be opened to fit the strap.
Semi-flush-in strap coilers represent a halfway point between the two previous variants. They are partially installed in the window frame, with the remaining part protruding out.
When mounting the strap coilers, it is important to choose the right product for the hole spacing. SELVE offers various versions for all standard hole spacings.
Another important factor is the „strap width“. Mini-coilers have a strap width of 15 mm, while new construction coilers measure 23 mm.
Alongside our tried-and-tested strap coilers, we also offer models with cords. Cord coilers are used in a virtually identical way to strap coilers, but use a cord instead of a strap.
Whether they use straps or cords, some products come with the mechanism pre-coiled, while others require the strap or cord to be purchased separately and coiled on site.
Large and heavy roller shutters require special coilers with an extra-long strap, used in conjunction with strap tension gears. These feature a larger coiling area and spring case, as well as a greater spring force.
The strap coilers are available in a wide range of shapes, designs and colours. Users can also choose from a variety of different coloured straps, cover panels and strap guides.

Any questions about our products?

TO CONTACT

So bestellen Sie SELVE Rollladenbauteile – Schritt für Schritt

1.

Sortiment entdecken

Lernen Sie alle Vorteile unserer Produkte und Lösungen kennen:

Produktinfos

2.

Beratung anfragen

Unverbindliches Gespräch mit Ihrem SELVE-Ansprechpartner buchen:

Kontaktformular

3.

Muster anfordern

Überzeugen Sie sich vor der Großbestellung von Qualität und Haptik – Muster auf Anfrage erhältlich:

Muster anfragen

4.

Produkte bestellen

Bitte nutzen Sie für Bestellungen unser Kundenportal:

Kundenportal

Your personal benefits

Einfache Installation:

Kompatibel mit allen gängigen Rollladensystemen

Zufriedene Kunden:

Breites Sortiment - für jede Einbausituation

Mehr Umsatz:

Premium-Produkt: zeitloses, hochwertiges Design in Schwarz-Weiß-Optik vereint mit erstklassigen Funktionen
Erprobte Technik – die Multi-Send-Technik ist schon seit mehr als 20 Jahren am Markt
Mehr Aufträge durch Weiterempfehlungen

The strap coiler is used to manually open and close roller shutters. Pulling on the strap moves the shutter upwards. Inside the roller shutter box, the strap is coiled around the pulley and the shutter is wound around the octagonal shaft. To close the roller shutter, the strap is pulled out from the strap coiler. The shutter unwinds from the octagonal shaft under its own weight and slides down the guide rails in front of the window until it is closed.

The strap guide guides the strap through the wall in the roller shutter box. SELVE also offers a wide range of strap guides. Most of the strap guides used today reduce the air permeability to a minimum and are well insulated just like the roller shutter box itself. This prevents unwanted heat loss.

The belt then runs out from the roller shutter box and down along the wall or window frame. The strap coiler is mounted vertically beneath the strap guide. Regardless of which coiler variant is installed, all versions function identically. The belt is guided inside the strap coiler via the clamper. As the name suggests, this component clamps the strap when not in use and therefore retains the roller shutter securely in any position. On the outside, the strap is secured to a spring case. This houses a spring made from premium spring steel that is designed for the respective strap length. This spring winds the strap inside the coiler. For quality reasons, SELVE only produces its spring cases from metal. This ensures that this key element of every strap coiler functions reliably for many years.

Discover all the strap coilers in our catalogue

Notice! We supply exclusively to trade professionals.

Downloads

Im Moment gibts noch nichts zu sehen...

selve.cookiebot.oxomi-optout

selve.cookiebot.button

Welche Gurtbreite brauche ich?

Messen Sie den alten Gurt oder den Gurtschlitz nach. 14 mm (teils 18 mm) passen zu Mini-Wicklersystemen (schmale Vorbau-/Aufsatzrollläden), 23 mm sind der Standard im Neubau bzw. Maxi-System; 22 mm kommen bei Getriebe- und Wendegurten zum Einsatz. Wichtig: immer dieselbe Breite wie zuvor wählen – ein zu breiter Gurt reibt, ein zu schmaler rutscht.

Woran erkenne ich, dass der Rollladengurt gewechselt werden muss?

Typische Anzeichen sind ausgefranste Kanten, sichtbare Risse, ein aufgerauter oder ausgebleichter Gurt sowie ein Wickler, der durchrutscht oder schwergängig läuft. Spätestens wenn der Gurt reißt, ist ein Austausch nötig – meist ohne Umbau, da SELVE-Gurte auf gängige Wicklerbreiten abgestimmt sind.

Sind SELVE-Gurte mit meinem vorhandenen Wickler kompatibel?

SELVE-Gurte sind auf SELVE-Gurtwickler, -Schnurwickler und -Gurtführungen (bis 23 mm) abgestimmt. Bei Fremdwicklern sollten Sie vorab Gurtbreite und Aufnahme prüfen bzw. den alten Gurt zum Vergleich nachmessen.

Contact

Do you have any questions about our products? Then get in touch with us. We will answer you as quickly as possible.

Contact form

Subject *

Salutation *

First name *

Last name *

Email address *

Street

Post code

City

Country

Phone

Message *

Fields marked with asterisks (*) are required.

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

To continue, enter the characters shown above*